clear
 
All our products are certified by
 
Compliance
Malaysian & Singapore Standards
 
Desktop :: Subpage Masthead

    Our Products
    We supply high quality reinforced steel bars and steel wire to meet the building needs for your construction projects. Our products are all marked and certified to be in compliance with the international steel standard. All our products are certified by the Complied Malaysian & Singapore Standard (suitable for pre-caster for HDB/ MRT projects), CIDB certification, SIRIM and British Standard. The products are available from custom or stock manufacturing.
     
    Steel Bar

    Steel Bar
    Our steel fabrication, trading and manufacturing activities guarantees you high quality steel bars including high tensile deformed bar (T) such as T10, T12, TI3, T16, T20, T22, T25, TZ2, T40, TSO and mild steel round bars (R) R5.5, R6, RB, R10, R1Z, R16, and R20.
    Read More »
     

    Steel mass for various reinforcement bar sizes
     
    Diameter (mm)
    Mass (kg/m)
    Length (m)
    Weight/ Bundle (mt)*
    Mild Steel Round Bar Deformed Bars
    6 8 10 13 10 13 16 20 22 25 28 32 40 50
    0.222 0.395 0.617 1.042 0.617 1.042 1.579 2.466 2.984 3.854 4.834 6.313 9.864 15.413
    6 6 12 12 12 12 12 12 12 12 12 12 12 12
    1.002 1.005 2.006 2.013 2.029 2.026 2.046 2.071 2.005 2.127 2.088 2.121 2.131 2.035
    *Bundle sizes may vary
     

    Grade 500
    Specifications Grade Yield min (N/mm2) Tensile min (N/mm2) Ratio (mm) Cal. Method Elong 5D (min%) Agt (min%) Bend (size: mm) Rebend (size: mm)
    SS2 Part 2: 1999 RB500W 500 550 1.05 Nominal 14 2.5
    • 6/ 8/ 10: ~3D
    • 12: ~4D
    • 16 & 20: ~5D
    • 25/ 32/ 40: ~6D
    (160° to 180°)
    • 6/ 8/ 10: ~5D
    • 12: ~5D
    • 20 & 25: 8D
    • 32/ 40: 10D
    (90° - 20min - 20°)
    SS 560: 2016 B500B 500 - 650 Y*1.08 1.08 Nominal   5
    • ≤ 16mm: 3D
    • > 16mm: 6D
    • ≤ 16mm: 4D
    • > 16mm: 7D
    B600B 600 - 780 Y*1.08 1.08 Nominal   5
    • ≤ 16mm: 3D
    • > 16mm: 6D
    • ≤ 16mm: 4D
    • > 16mm: 7D
    B600A 500 - 650
    • < 8mm: 1.02
    • ≥ 8mm: 1.05
    		 1.08 Nominal  
    • < 8mm: 1.0
    • ≥ 8mm: 2.5
    • ≤ 16mm: 3D
    • > 16mm: 6D
    (160° to 180°)
    • ≤ 16mm: 4D
    • > 16mm: 7D
    (90° - 1hr - 20°)
    AS/NZS 4671: 2001 500N 500 - 650 Y*1.08 1.08 Nominal   5 all sizes: 4D
    (< 16 bend 90°
    > 20 bend 180°)
    • < 16mm: 4D
    • > 20mm: N.A.
    (90° - 1hr - 20°)
    500E 500 - 600 Y*(1.15 - 1.40) 1.15 - 1.40 Nominal   10 Same as 500N Same as 500N
    500L 500 - 750 Y*1.03 1.03 Nominal   1.5 3D 90° - 1hr - 20°
    BS 4449: 2005 B500B 500 - 650 Y*1.08 1.08 Nominal   5  
    • ≤ 16mm: 4D
    • > 16mm: 7D
    (90° - 1hr - 20°)
     

    Others
    Specifications Grade Yield min (N/mm2) Tensile min (N/mm2) Ratio (mm) Cal. Method Elong 5D (min%) Agt (min%) Bend (size: mm) Rebend (size: mm)
    SS2 Part 2: 1999 300 300 330 1.10 Nominal 16  
    • 6/ 8/ 10: ~2D
    • 12: ~2.5D
    • 16 & 20: 3D
    (160° to 180°)    		  
    AS/NZS 4671: 2001 250N 250 Y*1.08 1.08 Nominal   5 Same as 500N Same as 500N
    300E 300 - 380 Y*(1.15 - 1.50) 1.15 - 1.50 Nominal   15 Same as 500N Same as 500N
    BIS IS 1786: 2008 Fe500D 500   1.1 Effective 16 5
    • </= 20-3D
    • > 20 ~4D
    (180°)
    • </= 10^-4D
    • > 10 ~6D
    (45° - 30 min(100°) - 22.5°)
    500A 500 - 650  
    • < 8mm: 1.02
    • ≥ 8mm: 1.05
    		 Nominal  
    • < 8mm: 1.0
    • ≥ 8mm: 2.5
    		  
    • ≤ 16mm: 4D
    • > 16mm: 7D
    (90° - 1hr - 20°)
    500B 500 - 650 Y*1.08 1.08 Nominal   5.0 3D
    • ≤ 16mm: 4D
    • > 16mm: 7D
    (90° - 1hr - 20°)
    MS ISO 16120-2: 2008 NA (wire rod grade)
    BIS IS 1786: 2008 RB500 500 - 650  
    • D ≤ 8mm -1.02
    • D ≥ 8mm -1.05
    		 Effective 14
    • D ≤ 8mm -1.0
    • D ≥ 8mm -2.5
    		 3D(180°)
    • </= 16 - 4D
    • > 16 - 7D
    (90° - 60 min(100°) - 20°)
    RB460 460  
    • D ≤ 8mm -1.02
    • D ≥ 8mm -1.05
    		 Effective 14
    • D ≤ 8mm -1.0
    • D ≥ 8mm -2.5
    		 3D(180°)
    • </= 16mm - 4D
    • > 16 - 7D
    (90° - 60 min(100°) - 20°)
    SNI SNI 07-2052-2002 Bj TS 40 390 560    
    • D < 32mm ~18
    • 32 ≤ D
    • < 40mm -16
    • D = 40mm -14
    		   5D(180°)  
    Bj TS 50 490 620    
    • D < 32mm ~14
    • 32 ≤ D
    • < 40mm ~12
    • D = 40mm ~10
    		  
    • ≤ 25mm ~5D
    • > 25mm ~6D
    (180°)    		  
     
     
    Steel Mesh

    Steel Mesh
    Our steel mesh is made of longitudinal and transverse bars that are carefully and skillfully welded together to make reinforcements of foundations in any construction project.
    Read More »
     
    Our mesh sizes, which refers to the holes that are measured in terms of the distance between the center of distance of line and the cross wires, are mainly in millimeters. We manufacture carbon steel (plain steel, which comes in both woven and welded mesh, which are made of carbon. The choice of the carbon steel ensures that we offer you a versatile and diversely used, durable, strong and magnetic product at relatively low cost. Thus, our steel mesh Is suitable in industries and uses such as in window guards, infill panels and grill and radiator lockers among others.
     

    Standards
    Standard Yield Strength (N/mm2) (MPa) Weld Shear Load (N)
    SS 18: 1999
    Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric    		 500 NA
    SS 32: 19999
    Steel fabric for the reinforcement of concrete    		 500
    • 250 x area of larger wire (for plain wires)
    • 150 x area of larger wire (for ribbed wires)
    BS 4482: 1985
    Cold-reduced steel wire for the reinforcement of concrete    		 460 NA
    BS 4483: 1998
    Steel fabric for the reinforcement of concrete    		 460 115 x area of smaller wire
     

    Standard Metric Fabric
    SS:32 Or NEF500 BS 4483 Ref. no. Wire Spacing (mm) Wire Diameter (mm) Cross-Sectional Area (mm2/m) Nominal Mass (kg/m2)
    Main Cross Main Cross Main Cross
    Square Fabric: A-Series
    A13 - 200 200 13 13 664 664 10.42
    A12 - 200 200 12 12 566 566 8.88
    A11 - 200 200 11 11 475 475 7.46
    A10 A 393 200 200 10 10 393 393 6.16
    A9 - 200 200 9 9 318 318 4.99
    A8 A 252 200 200 8 8 252 252 3.95
    A7 A 193 200 200 7 7 192 192 3.02
    A6 A 142 200 200 6 6 142 142 2.22
    *A5 A 98 200 200 5 5 98 98 1.54
    *Reference No. A5 are available in Standard Sheet of 6.0m x 2.4m only.
     
    SS:32 Or NEF500 BS 4483 Ref. no. Wire Spacing (mm) Wire Diameter (mm) Cross-Sectional Area (mm2/m) Nominal Mass (kg/m2)
    Main Cross Main Cross Main Cross
    Square Fabric: D-Series
    D13 - 100 100 13 13 1327 1327 20.84
    D12 - 100 100 12 12 1131 1131 17.76
    D11 - 100 100 11 11 950 950 14.92
    D10 - 100 100 10 10 785 785 12.32
    D9 - 100 100 9 9 636 636 9.98
    D8 - 100 100 8 8 503 503 7.90
    D7 - 100 100 7 7 385 385 6.40
    D6 - 100 100 6 6 283 283 4.44
    *D5 - 100 100 5 5 196 196 3.08
    *Reference No. D5 are available in Standard Sheet of 6.0m x 2.4m only.
     
    SS:32 Or NEF500 BS 4483 Ref. no. Wire Spacing (mm) Wire Diameter (mm) Cross-Sectional Area (mm2/m) Nominal Mass (kg/m2)
    Main Cross Main Cross Main Cross
    Square Fabric: E-Series
    E13 - 150 150 13 13 664 664 10.42
    E12 - 150 150 12 12 566 566 8.88
    E11 - 150 150 11 11 475 475 7.46
    E10 - 150 150 10 10 393 393 6.16
    E9 - 150 150 9 9 318 318 4.99
    E8 - 150 150 8 8 252 252 3.95
    E7 - 150 150 7 7 192 192 3.02
    E6 - 150 150 6 6 142 142 2.22
     
    SS:32 Or NEF500 BS 4483 Ref. no. Wire Spacing (mm) Wire Diameter (mm) Cross-Sectional Area (mm2/m) Nominal Mass (kg/m2)
    Main Cross Main Cross Main Cross
    Rectangular Fabric: B-Series
    B13 - 100 200 13 10 1327 393 13.50
    B12 B 1131 100 200 12 8 1131 252 10.90
    B11 - 100 200 11 8 950 252 9.43
    B10 B 785 100 200 10 8 785 252 8.14
    B9 - 100 200 9 8 636 252 6.97
    B8A - 100 200 8 7 335 193 4.14
    B8 B 503 100 200 8 8 503 252 5.93
    B7 B 385 100 200 7 7 385 193 4.53
    B6 B 283 100 200 6 7 283 193 3.73
    *B5 B 195 100 200 5 7 196 193 3.05
    *Reference No. B5 are available in Standard Sheet of 6.0m x 2.4m only.
     

    Substitution of FY Metal Fabric for High Tensile Bars
    Bars Substitution of FY Metal Fabric for High Tensile Bars
    Diameter (mm) Spacing (mm) Area (mm2/m) Equivalent Area (mm2/m) Recommended FY Metal Fabric (mm2/m)
    10 75 1047 993 D12 B12 (1311)  
    100 786 745 D10 B10 (785)  
    125 628 596 D9 B9 (636)  
    150 524 497 D8 B8 (503)  
    175 449 426 D8 B8 (503)  
    200 393 373 D7 B7A B7 (385) A10 (393)
    250 314 298 A9 (318) B8A (335)
    300 262 248 A8 (252) D6 B6 (283)
    13 100 1327 1259 D13 B13 (1328)  
    125 1062 1007 D12 B12 (1311)  
    150 885 839 D11 B11 (950)  
    175 759 719 D10 B10 (785)  
    200 664 630 D9 B9 (636)  
    250 531 504 D8 B8 (503)  
    300 442 420 D8 B8 (503)  
    16 150 1341 1271 D13 B13 (1328)  
    175 1149 1090 D12 B12 (1311)  
    200 1005 954 D11 B11 (950)  
    250 804 763 D10 B10 (785)  
    300 670 636 D9 B9 (636)