Our Products

We supply high quality reinforced steel bars and steel wire to meet the building needs for your construction projects. Our products are all marked and certified to be in compliance with the international steel standard. All our products are certified by the Complied Malaysian & Singapore Standard (suitable for pre-caster for HDB/ MRT projects), CIDB certification, SIRIM and British Standard. The products are available from custom or stock manufacturing.

Steel Bar

Our steel fabrication, trading and manufacturing activities guarantees you high quality steel bars including high tensile deformed bar (T) such as T10, T12, TI3, T16, T20, T22, T25, TZ2, T40, TSO and mild steel round bars (R) R5.5, R6, RB, R10, R1Z, R16, and R20.


Diameter (mm)
Mass (kg/m)
Length (m)
Weight/ Bundle (mt)*

Mild Steel Round Bar				Deformed Bars
6	8	10	13	10	13	16	20	22	25	28	32	40	50
0.222	0.395	0.617	1.042	0.617	1.042	1.579	2.466	2.984	3.854	4.834	6.313	9.864	15.413
6	6	12	12	12	12	12	12	12	12	12	12	12	12
1.002	1.005	2.006	2.013	2.029	2.026	2.046	2.071	2.005	2.127	2.088	2.121	2.131	2.035

*Bundle sizes may vary

Grade 500

Specifications	Grade	Yield min (N/mm²)	Tensile min (N/mm²)	Ratio (mm)	Cal. Method	Elong 5D (min%)	Agt (min%)	Bend (size: mm)	Rebend (size: mm)
SS2 Part 2: 1999	RB500W	500	550	1.05	Nominal	14	2.5	6/ 8/ 10: ~3D 12: ~4D 16 & 20: ~5D 25/ 32/ 40: ~6D (160° to 180°)	6/ 8/ 10: ~5D 12: ~5D 20 & 25: 8D 32/ 40: 10D (90° - 20min - 20°)
SS 560: 2016	B500B	500 - 650	Y*1.08	1.08	Nominal		5	≤ 16mm: 3D > 16mm: 6D	≤ 16mm: 4D > 16mm: 7D
	B600B	600 - 780	Y*1.08	1.08	Nominal		5	≤ 16mm: 3D > 16mm: 6D	≤ 16mm: 4D > 16mm: 7D
	B600A	500 - 650	< 8mm: 1.02 ≥ 8mm: 1.05	1.08	Nominal		< 8mm: 1.0 ≥ 8mm: 2.5	≤ 16mm: 3D > 16mm: 6D (160° to 180°)	≤ 16mm: 4D > 16mm: 7D (90° - 1hr - 20°)
AS/NZS 4671: 2001	500N	500 - 650	Y*1.08	1.08	Nominal		5	all sizes: 4D (< 16 bend 90° > 20 bend 180°)	< 16mm: 4D > 20mm: N.A. (90° - 1hr - 20°)
	500E	500 - 600	Y*(1.15 - 1.40)	1.15 - 1.40	Nominal		10	Same as 500N	Same as 500N
	500L	500 - 750	Y*1.03	1.03	Nominal		1.5	3D	90° - 1hr - 20°
BS 4449: 2005	B500B	500 - 650	Y*1.08	1.08	Nominal		5		≤ 16mm: 4D > 16mm: 7D (90° - 1hr - 20°)

Others

Specifications	Grade	Yield min (N/mm²)	Tensile min (N/mm²)	Ratio (mm)	Cal. Method	Elong 5D (min%)	Agt (min%)	Bend (size: mm)	Rebend (size: mm)
SS2 Part 2: 1999	300	300	330	1.10	Nominal	16		6/ 8/ 10: ~2D 12: ~2.5D 16 & 20: 3D (160° to 180°)
AS/NZS 4671: 2001	250N	250	Y*1.08	1.08	Nominal		5	Same as 500N	Same as 500N
AS/NZS 4671: 2001	300E	300 - 380	Y*(1.15 - 1.50)	1.15 - 1.50	Nominal		15	Same as 500N	Same as 500N
BIS IS 1786: 2008	Fe500D	500		1.1	Effective	16	5	</= 20-3D > 20 ~4D (180°)	</= 10^-4D > 10 ~6D (45° - 30 min(100°) - 22.5°)
	500A	500 - 650		< 8mm: 1.02 ≥ 8mm: 1.05	Nominal		< 8mm: 1.0 ≥ 8mm: 2.5		≤ 16mm: 4D > 16mm: 7D (90° - 1hr - 20°)
	500B	500 - 650	Y*1.08	1.08	Nominal		5.0	3D	≤ 16mm: 4D > 16mm: 7D (90° - 1hr - 20°)
MS ISO 16120-2: 2008	NA (wire rod grade)
BIS IS 1786: 2008	RB500	500 - 650		D ≤ 8mm -1.02 D ≥ 8mm -1.05	Effective	14	D ≤ 8mm -1.0 D ≥ 8mm -2.5	3D(180°)	</= 16 - 4D > 16 - 7D (90° - 60 min(100°) - 20°)
BIS IS 1786: 2008	RB460	460		D ≤ 8mm -1.02 D ≥ 8mm -1.05	Effective	14	D ≤ 8mm -1.0 D ≥ 8mm -2.5	3D(180°)	</= 16 - 4D > 16 - 7D (90° - 60 min(100°) - 20°)
SNI SNI 07-2052-2002	Bj TS 40	390	560			D < 32mm ~18 32 ≤ D < 40mm -16 D = 40mm -14		5D(180°)
SNI SNI 07-2052-2002	Bj TS 50	490	620			D < 32mm ~14 32 ≤ D < 40mm ~12 D = 40mm ~10		≤ 25mm ~5D > 25mm ~6D (180°)

Steel Mesh

Our steel mesh is made of longitudinal and transverse bars that are carefully and skillfully welded together to make reinforcements of foundations in any construction project.

Our mesh sizes, which refers to the holes that are measured in terms of the distance between the center of distance of line and the cross wires, are mainly in millimeters. We manufacture carbon steel (plain steel, which comes in both woven and welded mesh, which are made of carbon. The choice of the carbon steel ensures that we offer you a versatile and diversely used, durable, strong and magnetic product at relatively low cost. Thus, our steel mesh Is suitable in industries and uses such as in window guards, infill panels and grill and radiator lockers among others.

Standards

Standard	Yield Strength (N/mm²) (MPa)	Weld Shear Load (N)
SS 18: 1999 Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric	500	NA
SS 32: 19999 Steel fabric for the reinforcement of concrete	500	250 x area of larger wire (for plain wires) 150 x area of larger wire (for ribbed wires)
BS 4482: 1985 Cold-reduced steel wire for the reinforcement of concrete	460	NA
BS 4483: 1998 Steel fabric for the reinforcement of concrete	460	115 x area of smaller wire

Standard Metric Fabric

SS:32 Or NEF500	BS 4483 Ref. no.	Wire Spacing (mm)		Wire Diameter (mm)		Cross-Sectional Area (mm²/m)		Nominal Mass (kg/m²)
SS:32 Or NEF500	BS 4483 Ref. no.	Main	Cross	Main	Cross	Main	Cross	Nominal Mass (kg/m²)
Square Fabric: A-Series
A13	-	200	200	13	13	664	664	10.42
A12	-	200	200	12	12	566	566	8.88
A11	-	200	200	11	11	475	475	7.46
A10	A 393	200	200	10	10	393	393	6.16
A9	-	200	200	9	9	318	318	4.99
A8	A 252	200	200	8	8	252	252	3.95
A7	A 193	200	200	7	7	192	192	3.02
A6	A 142	200	200	6	6	142	142	2.22
*A5	A 98	200	200	5	5	98	98	1.54
*Reference No. A5 are available in Standard Sheet of 6.0m x 2.4m only.

SS:32 Or NEF500	BS 4483 Ref. no.	Wire Spacing (mm)		Wire Diameter (mm)		Cross-Sectional Area (mm²/m)		Nominal Mass (kg/m²)
SS:32 Or NEF500	BS 4483 Ref. no.	Main	Cross	Main	Cross	Main	Cross	Nominal Mass (kg/m²)
Square Fabric: D-Series
D13	-	100	100	13	13	1327	1327	20.84
D12	-	100	100	12	12	1131	1131	17.76
D11	-	100	100	11	11	950	950	14.92
D10	-	100	100	10	10	785	785	12.32
D9	-	100	100	9	9	636	636	9.98
D8	-	100	100	8	8	503	503	7.90
D7	-	100	100	7	7	385	385	6.40
D6	-	100	100	6	6	283	283	4.44
*D5	-	100	100	5	5	196	196	3.08
*Reference No. D5 are available in Standard Sheet of 6.0m x 2.4m only.

SS:32 Or NEF500	BS 4483 Ref. no.	Wire Spacing (mm)		Wire Diameter (mm)		Cross-Sectional Area (mm²/m)		Nominal Mass (kg/m²)
SS:32 Or NEF500	BS 4483 Ref. no.	Main	Cross	Main	Cross	Main	Cross	Nominal Mass (kg/m²)
Square Fabric: E-Series
E13	-	150	150	13	13	664	664	10.42
E12	-	150	150	12	12	566	566	8.88
E11	-	150	150	11	11	475	475	7.46
E10	-	150	150	10	10	393	393	6.16
E9	-	150	150	9	9	318	318	4.99
E8	-	150	150	8	8	252	252	3.95
E7	-	150	150	7	7	192	192	3.02
E6	-	150	150	6	6	142	142	2.22

SS:32 Or NEF500	BS 4483 Ref. no.	Wire Spacing (mm)		Wire Diameter (mm)		Cross-Sectional Area (mm²/m)		Nominal Mass (kg/m²)
SS:32 Or NEF500	BS 4483 Ref. no.	Main	Cross	Main	Cross	Main	Cross	Nominal Mass (kg/m²)
Rectangular Fabric: B-Series
B13	-	100	200	13	10	1327	393	13.50
B12	B 1131	100	200	12	8	1131	252	10.90
B11	-	100	200	11	8	950	252	9.43
B10	B 785	100	200	10	8	785	252	8.14
B9	-	100	200	9	8	636	252	6.97
B8A	-	100	200	8	7	335	193	4.14
B8	B 503	100	200	8	8	503	252	5.93
B7	B 385	100	200	7	7	385	193	4.53
B6	B 283	100	200	6	7	283	193	3.73
*B5	B 195	100	200	5	7	196	193	3.05
*Reference No. B5 are available in Standard Sheet of 6.0m x 2.4m only.

Substitution of FY Metal Fabric for High Tensile Bars

Bars			Substitution of FY Metal Fabric for High Tensile Bars
Diameter (mm)	Spacing (mm)	Area (mm²/m)	Equivalent Area (mm²/m)	Recommended FY Metal Fabric (mm²/m)
10	75	1047	993	D12 B12 (1311)
	100	786	745	D10 B10 (785)
	125	628	596	D9 B9 (636)
	150	524	497	D8 B8 (503)
	175	449	426	D8 B8 (503)
	200	393	373	D7 B7A B7 (385)	A10 (393)
	250	314	298	A9 (318)	B8A (335)
	300	262	248	A8 (252)	D6 B6 (283)
13	100	1327	1259	D13 B13 (1328)
	125	1062	1007	D12 B12 (1311)
	150	885	839	D11 B11 (950)
	175	759	719	D10 B10 (785)
	200	664	630	D9 B9 (636)
	250	531	504	D8 B8 (503)
	300	442	420	D8 B8 (503)
16	150	1341	1271	D13 B13 (1328)
	175	1149	1090	D12 B12 (1311)
	200	1005	954	D11 B11 (950)
	250	804	763	D10 B10 (785)
	300	670	636	D9 B9 (636)

Call Us Now

+6019 313 1835

		PT 1985, KG BALIK BUKIT, 09600 LUNAS, KEDAH

		enquiry@fymetal.com.my

		+6012-798 7233

Desktop View | Mobile View

Test header